Model NO. |
XVR9704-UKSA1 |
XVR9708-UKSA1 |
Main Processor |
NT98323 |
NT98315 |
Operation System |
Linux(embedded) |
Video Input Format |
TVI&AHD&CVI(up to 8MP), 960H, IP |
Recording Bandwidth |
Inputs |
12Mbps ~36Mbps,
IP Bandwidth default is 12Mbps
|
24Mbps ~72Mbps,
IP Bandwidth default is 24Mbps |
Out |
48Mbps |
72Mbps |
Analog video-input |
4CH inputs |
8CH inputs |
Live |
IP Video Input |
2ch(only IP up to 6ch) |
4ch(only IP up to 12ch) |
Composite Video Input |
up to 6ch (Analog video + IP video) |
up to 12ch (Analog video + IP video) |
Performance |
Recording and Playback |
Compression |
Audio: G.711a ,Video: H.264/H.265 |
Display resolution |
Analog : 8MP 15fps,5MP 20fps,4MP/1080P/720P/960H 30fps |
IP: 4K/4MP/1080P/720P |
Speed |
Analog :8MP:7fps(each ch),
5MP:12fps(each ch),
4MP:15fps(each ch),
1080P:PAL:25fps(each ch)/NTSC:30fps(each ch) |
IP:PAL:25fps(each ch)/NTSC: 30fps(each ch) |
Event |
MD(Sensitivity Level 1~8)
Videlo loss,
Beep, Email, Push notification to Mobile APP |
Playback function |
Fast forward / backward (2x, 4x, 8x,16x)
Slow forward (1/2x, 1/4x, 1/8x,1/16x) |
Playback |
8MP: 28fps,5MP: 48ps,
4MP: 60fps,1080P: 120fps |
8MP: 60fps(Max 4CH playback),
5MP: 96fps(Max 8CH playback),
4MP: 120fps(Max 8CH playback),
1080P: 240fps(Max 8CH playback) |
Intelligent |
Perimeter Intrusion Detection, Line Crossing Detection, Human/Vehicle Detection |
Perimeter Intrusion Detection,
Line Crossing Detection |
UI/Monitoring |
Local |
UI5.0 |
Web viewer |
IE10/11,Safari V12.1 above,Firefox V.52 above,
Google chrome V.57 above,Edge V.79 above |
Mobile viewer |
Rxcamview |
Interface |
Voice command |
Home Device:Google Assistant, Amazon Alexa |
P/W Reset |
Factory Reset: Press 10 seconds |
Monitors |
BNC |
1 (704*576) |
VGA |
1 (1024*768,1280*720,1280*1024,1440*900,1920*1080) |
HDMI |
1 (1024*768,1280*720,1280*1024,1440*900,
1920*1080,2560*1440,3840*2160/EDID) |
Connections |
Ethernet |
1 RJ45 10/100 Base-T |
1 RJ45 100/1000 Base-T |
USB |
USB2.0*1(front), USB2.0*1+(rear) |
Audio Input/out |
4 in / 1 out |
4 in / 1 out |
E-sata |
1 optional, not supported by default |
HDD |
1 SATA HDD, up to 8TB default |
RS485 |
1 |
Alarm Input/out |
4 in /1 out |
8 in /1 out |
General |
Mechanical design |
Dimension (WxDxH) |
300X228X54mm |
Electrical |
Input Voltage/Current |
DC12V/2A |
Power consumption (excluding hard disk) |
4.7W |
11W |
Environmental |
Operating Temperature/Humidity |
Temperature : 0°C~+40°C (32°F ~ 104°F), Humidity : Less than 90%RH |